Spa Fitter

Resort Hot Tubs Laguna RP288B Replacement Cover

The Resort Hot Tubs Laguna RP288B takes the AIRCAP 1™ X-Large — a foam-free replacement hot tub cover for square spas 92"–94". The Laguna RP288B's cabinet measures 93" x 93", inside the X-Large's range. The cover weighs 35–40 lb for life, costs $1,195, is engineered to comply with ASTM F1346-23, and carries a 3-year limited warranty.

Top-down view of the Resort Hot Tubs Laguna RP288B hot tub — 93" x 93" square cabinet
Resort Hot Tubs Laguna RP288B, seen from above — a 93" x 93" square cabinet.
Spa cabinet93" x 93"
AIRCAP 1™ sizeX-Large fits 92"–94"
Cover weight35–40 lb — constant for life
Price$1,195, free US shipping
SkirtZiptech™ modular, three lengths included
SafetyEngineered to comply with ASTM F1346-23
Warranty3-year limited warranty
AIRCAP 1™ X-Large (Fits 92"-94" Spas) Deep Grey™
The cover you’d order AIRCAP 1™ X-Large (Fits 92"-94" Spas) Deep Grey™ $1,195 — free US shippingSKU AC6004 · UPC 850084423031

Why the X-Large fits the Laguna RP288B

The AIRCAP 1™ comes in six sizes covering square spas from 77" to 94". Each size is built to overhang its band slightly — that is how a spa cover is meant to sit — so the X-Large, which fits cabinets 92"–94", covers the Laguna RP288B's 93" x 93" shell with the right overhang.

At 93" the Laguna RP288B sits mid-band in the X-Large's 92"–94" range, 1" off the bottom and 1" off the top. No other Resort Hot Tubs model in the Spa Fitter has the Laguna RP288B's 93" x 93" cabinet. The 6 Resort Hot Tubs models we fit sit on 3 footprints, and the Laguna RP288B is on the largest of them; together they span 3 of the six AIRCAP 1 sizes.

Cabinet dimensions can change between model years. Before ordering, measure your Laguna RP288B at its widest point across the top, in both directions, including any acrylic lip that overhangs the cabinet — the SureFit™ guide walks through it in two measurements. If a figure you have found elsewhere is larger than ours, an overhanging lip is the usual reason. If your spa measures between two sizes, round up.

Every spa in our catalogue that measures 93" x 93" is on one page: hot tubs that take a 93" × 93" cover — the same AIRCAP 1™ X-Large, at the same price.

How the AIRCAP 1™ is built

Instead of a rigid foam core wrapped in vinyl, the AIRCAP 1™ uses welded drop-stitch construction: a sealed air chamber with no foam to absorb water, so it does not become the waterlogged two-person lift that ends most foam covers. More on how it insulates, how it holds up, and why it is foam-free — or estimate what your current foam cover weighs.

Every Resort Hot Tubs model we fit

ModelCabinetAIRCAP 1™
Buxton RP166L 78" x 78" XX-Small
Haven RC166L 78" x 78" XX-Small
Frisco RP177B 84" x 84" Small
Palm RP177L 84" x 84" Small
Retreat RC177L 84" x 84" Small
Laguna RP288B (this page) 93" x 93" X-Large

All Resort Hot Tubs models in the Spa Fitter

Resort Hot Tubs Laguna RP288B cover: common questions

What size hot tub cover fits the Resort Hot Tubs Laguna RP288B?

The Resort Hot Tubs Laguna RP288B takes the AIRCAP 1 X-Large, which fits square hot tubs measuring 92"–94" across. The Laguna RP288B's cabinet measures 93" x 93", inside that band. Measure your spa side to side across the top of the cabinet to confirm before ordering.

Will the AIRCAP 1 fit a Resort Hot Tubs Laguna RP288B?

Yes — the Laguna RP288B's 93" x 93" square cabinet falls in the AIRCAP 1 X-Large's 92"–94" range, and the Ziptech modular skirt system ships with three skirt lengths so the drop over the cabinet adjusts without a custom order. Cabinet sizes can change between model years, so confirm with two quick measurements.

How much does a replacement cover for the Resort Hot Tubs Laguna RP288B cost?

The AIRCAP 1 costs $1,195 in every size, including the pump, three Ziptech skirt lengths, and tie-down straps, with free US shipping and 30-day returns. Unlike a foam cover it has no foam core to waterlog, so it stays at its original 35–40 lb weight for life.

How heavy is a replacement cover for the Resort Hot Tubs Laguna RP288B?

The AIRCAP 1 X-Large weighs 35–40 lb and keeps that weight permanently — its sealed drop-stitch air core cannot absorb water. A foam cover starts at 40–75 lb and gains weight as the foam saturates.

Not a Laguna RP288B?

The Spa Fitter matches the current models of every major brand to the right AIRCAP 1™ — or measure any square spa with SureFit™.